Warehouses
Our warehouse solutions for military use can take any size and store any type of good in a fast and integrated way.
Our vision
The Gaptek System allows the design and construction of permanent, semi-permanent and deployable warehouses, using the same technology and all of them being removable with different degrees of reuse of the material used in their construction.
The buildings are made of a Gaptek Flat structure, composed of frames and purlins. The outer envelope is made of corrugated steel sheeting on the outside and a rock wool sandwich panel on the inside, which provides greater insulation and comfort.
OUR SOLUTIONS
Permanent warehouses
The permanent warehouses comply with the technical codes like any traditional construction site, but they have a reduced assembly time and greater adaptability.
Semi-Permanent warehouses
The semi-permanent warehouses also comply with technical codes like any traditional masonry building, but their materials allow a greater degree of disassembly and the reuse of approximately 80% of the materials.
Deployable warehouses
They are the solutions with the shortest assembly time and, in addition, they are 100% removable and relocatable. In its disassembly, all its materials, both for the structure and the roof, can be reused in the next assembly of the building.
Characteristics
Especificaciones
Dimensions: Unlimited
Assembly time: Depending on dimensions
Construction system: Gaptek Flat
Required cementation: Yes
Structure:
- Structure assembly: Mechanical joints
- Material: High resistance alloy aluminum AW-6082-T6
- Warranty: 20 years
Standard Resistances:
- Wind Standard: 120 km/h
- Fire Standard: REI30
- Snow Standard: 0.75 KN/sqm
- Climate conditions: -20 ºC to 55ºC
- Earthquake Standard: 0.1 g
Envelope:
- Exterior: Corrugated metal sheet, high-resistance tensile canvas or insulating panel
- Interior: Rock wool sandwich panel
Certifications:
- ISO 9001:2015 in Quality Management System
- UNE-EN ISO 14001 in Environmental Management
- UNE-ISO/IEC 27001 in Information Security Management
- ISO 45001:2018 in Occupational Health and Safety Management System
- CE Marking in all materials, including EN-1090 in relation to steel and aluminum structures
Options
Plus Resistances:
- Hurricane Kit: up to 250 km/h
- Fire Plus: up to REI120
- Snow Plus: up to 3 KN/sqm
Additional elements:
- Fire protection systems
- Geothermal energy systems
- Vehicle and personnel doors
- Controlled atmosphere
- High efficiency air cooling system
- Racks
Additional services:
- Maintenance
- Life warranty with Gaptek maintenance
- Logistics
Applicable standards:
- International Building Codes
- Eurocodes
- Spanish Technical Building Codes (CTE)
- UFC
Gaptek is synonymous with trust
Short build time
Pre-design and production of buildings for rapid assembly on site.
Turnkey solutions
We offer turnkey solutions, from design, construction, adaptation to building maintenance.
Predefined quality
All construction elements can comply with the CE marking and are subjected to the strictest quality controls.
Energy efficiency
We incorporate passive systems for greater energy savings.
Low maintenance
Minimum maintenance of the structures, even in aggressive environments, due to the antioxidant properties of aluminum.
Scalability
Expandable and adaptable buildings to your activity thanks to the use of replicable structures of modular architecture.
FAQs
What structural materials are used by Gaptek?
Gaptek has developed a construction system based on prefabricated profiles and dry joints, using aluminum as the structural material for the advantages it has as opposed to traditional construction and its great adaptability.
The advantages of aluminum as structural material as opposed to steel are numerous, such as the optimization and customization of the profiles according to its specific use, as compared with steel’s standard and normalized profiles, the lightness of the profiles and its resistance, the low maintenance thanks to the anticorrosive properties of aluminum and its total recyclability.
What type of machinery is required for the assembly of the warehouses?
Thanks to the lightness of aluminum profiles, the structural materials optimization and the simple assembly of our system using dry joints, it is not required to use very heavy machinery or large cranes to assemble our warehouses. Only ordinary machinery such as lifting platforms and telescopic cranes.
Can I purchase a fully equipped warehouse?
Yes. Gaptek offers turnkey solutions, as well as FCA. We can offer from the structure and envelope with a fully equipped building with all the required intralogistics elements.
Can I incorporate loading/unloading doors to the warehouse?
Yes. Gaptek buildings are prepared to accommodate that a warehouse needs: loading doors, bridge cranes, protections, racks…
Can offices be added to a warehouse?
Yes. The Gaptek System allows the integration of Gaptek offices inside or attached to other buildings, including the warehouse, being both buildings totally compatible.
What is Gaptek’s warehouses fire resistance?
The structures of the warehouses are protected against fire using inner lining of rock wool sandwich panels. Therefore, the degree of fire resistance will depend on the thickness of the panel and its own fire resistance, adapting the project to the specific regulation and the requirements of the warehouse, without limits.
What is the durability of Gaptek warehouses?
The materials used in Gaptek warehouses, as well as in the rest of Gaptek products, have a great resistance and durability, similar to traditional construction systems. Gaptek offers a 20 year guarantee according to the structure and 5 years to the rest of the elements that compose the warehouse.
I want my warehouse to be energy efficient. Is it possible?
Yes. In fact, all Gaptek solutions minimize in a passive way the intervention of machines to reach comfort and energy efficiency. In addition, our system is totally compatible with the installation of renewable energies such as solar panels and geothermal.
Are Gaptek warehouses resistant to extreme weather conditions?
Yes. Gaptek buildings are designed to withstand the conditions of the places inhabited by 85% of the world’s population, but they can also be designed for the most extreme climates of the planet. An example is the Gaptek warehouse that was built in the Antarctica.
Contact form
We make reality your project
Know our capabilities. We invite you to see our corporate video. Do not hesitate to contact us, we will be proud to help you make your project come true.
